BQJYT - WIRE RODS, HOT ROLLED BARS, COLD FINISHED BARS
- MSDS: BQJYT
- Manufacturer: USX CORP
- Product Name: WIRE RODS, HOT ROLLED BARS, COLD FINISHED BARS
- National Stock Number: 4210-00F026760
Product Identification
Product ID:WIRE RODS, HOT ROLLED BARS, COLD FINISHED BARS
MSDS Date:08/01/1985
FSC:4210
NIIN:00F026760
MSDS Number: BQJYT
Responsible Party
PITTSBURGH, PA 15230
US
Emergency Phone: 412-433-5811
Info Phone: 412-433-6840
Cage: FO673
Contractor
Telephone: 412-433-6840
Cage: FO673
Ingredients
STEEL MANUFACTURE, CHEMICALS *92-4*
CAS: 65997-19-5
IRON
CAS: 7439-89-6
RTECS: NO4565500
Fraction By Weight: 97-99%
OSHA PEL 10 MG/CUM
ACGIH TLV: 5 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: BENIGN PNEUMOCONIOSIS, ENHANCE THE
RISK OF LUNG CANCER, INFLUENZA-LIKE ILLNESS TERMED METAL FUME
FEVER, LEAD-INDUCED SYSTEMIC TOXICITY, BEHAVIORAL CHANGES, KIDNEY
DAMAGE, PERIPHERAL NEUROP ATHY. INGESTION: LEAD-INDUCED SYSTEMIC
TOXICITY.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT OR
HAS STOPPED, ADMINISTER ARTIFICIAL RESPIRATION OR OXYGEN AS
INDICATED. TREAT METAL FUME FEVER BY BED REST & ADMINISTER A PAIN &
FEVER REDU CING MEDICATION. DETAILED BIOLOGICAL TESTING &
EVALUATION OF POSSIBLE EXPOSURE CONDITIONS ARE REQUIRED TO DIAGNOSE
& CONTROL LEAD POISONING. OBTAIN MEEDICAL ATTENTION IN ALL CASES.
Handling
Handling and Storage Precautions:OPERATIONS W/THE POTENTIAL FOR
GENERATING HIGH CONCENTRATION OF AIRBORNE PARTICULATES SHOULD BE
EVAULATED & CONTROLLED AS NECESSARY.
Other Precautions:AVOID BREATHING METAL FUMES & OR DUSTS. HEATING ABOVE
THE MELTING POINT OF LEAD (620F) MAY LIBERATE LEAD FUME.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED DUST & FUME RESPIRATORS
TO AVOID EXCESSIVE INHALATION OF PARTICULATES. APPROPRIATE
RESPIRATOR SELECTION DEPENDS ON THE MAGNITUDE OF EXPOSURE.
Ventilation:LOCAL EXHAUST WHEN WELDING, BURNING, SAWING, BRAZING,
GRINDING OR MACHINING TO PREVENT EXCESSIVE DUST OR FUME EXPOSURE.
Protective Gloves:PROTECTIVE
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:CLEAN COVERALLS OR SIMILAR FULL BODY
PROTECTIVE CLOTHING
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:2650-2750F
Appearance and Odor:METALLIC GRAY, NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACID
Hazardous Decomposition Products:HYDROGEN, LEAD FUME
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.